FIBARO Z-Wave Flood Sensor


Quick Overview

Fibaro Flood Sensor is a universal, Z-Wave compatible, flood and temperature?sensor. Device can be battery (ca. 2 years battery life) or VDC powered (12 or 24
VDC). Flood alarm is sent to the Z-Wave network devices or additionally to any?alarm system controller, through opening a NC contact.
The device has built in temperature sensor, monitoring temperature of e.g. floor.?Fibaro Flood Sensor is designed to be placed on the floor or on a wall with a flood
sensor probe extended by connected wire. The device has built in LED indicator?and acoustic alarm. In addition, the sensor is equipped with a tilt sensor reporting
tilt or movement to the main controller e.g. when someone has taken the Sensor?from its original location. LED diode signals flood, operating mode or the Z-Wave
network communication range. Fibaro Flood Sensor is sink-proof, which means it?drifts on the water surface and keeps on sending alarm signal in case of
substantial inundation of water.

Product Details

? Compatible with any Z-Wave network controller,
? May be connected to any alarm system (potential free output terminal),
? Extremely easy installation – simply put on a surface prone to flooding,
? May be installed anywhere – flood sensor?s contacts extended with a wire,
? Battery or VDC powered. When connected to an external, VDC power source, the
?battery serves as an emergency power source,
? Theft protection – tilt is reported to the Z-Wave network or alarm system?s main controller,
? Two operating modes – flood / temperature sensor or just a temperature sensor.